AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2)


    1. A01X8WRE01
      Text in Illustration
      *1 Fulcrum Length

      Using SST, install the air fuel ratio sensor to the front exhaust pipe.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. A01X2YJE01
      Text in Illustration
      *1 White Tape

      Connect the air fuel ratio sensor connector and attach the clamp.

      Tech Tips

      Make sure that the white tape is in the position shown in the illustration.

  2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1)


    1. A01X9XLE01
      Text in Illustration
      *1 Fulcrum Length

      Using SST, install the air fuel ratio sensor to the front exhaust pipe.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. Connect the air fuel ratio sensor connector and attach the clamp.

  3. PERFORM AIR FUEL RATIO SENSOR COMPENSATION RESET

    Click here