ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid excessive force to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01X1QQE03
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the connector from the accelerator pedal position sensor assembly.

    2. Remove the 2 nuts and accelerator pedal position sensor assembly.