ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid excessive force to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not requite lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01X36YE05
      *1 for LHD:
      *2 for RHD:

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 nuts and accelerator pedal.