ACTIVE CONTROL ENGINE MOUNT INSPECTION

PROCEDURE


  1. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A01X996

      Visually check the front engine mounting insulator for leaks.

      If the fluid leaks, replace the front engine mounting insulator.

  2. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A01X8G1E01
      *1 Vacuum

      Connect a vacuum pump to the engine mount insulator.

    2. Using the vacuum pump, apply a vacuum of 80 kPa (600 mmHg. 25 in.Hg) and wait for 1 minute.

    3. Check that there is no change in the needle movement of the vacuum pump gauge.

      If the result is not as specified, replace the front engine mounting insulator.