ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the sensor.

   2. 

      Using a 19 mm deep socket wrench, install the sensor.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

   3. Connect the sensor connector.

2. Click here

   ADD ENGINE COOLANT

   Click here

3. Click here

   INSPECT FOR COOLANT LEAK

   Click here

4. Click here

   INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

6. Click here

   INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

7. Click here

   INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)

   Click here