CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR

    A01XA5S

    1. Apply a light coat of engine oil to the O-ring.

      Note

      When reusing the sensor, inspect the O-ring.

      If the O-ring has scratches or cuts, replace the sensor.

    2. A01X7R6

      Install the sensor with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Connect the sensor connector.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)

    Click here