ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

    B001YSX

    1. Disconnect the sensor connector.

    2. Using a 19 mm deep socket wrench, remove the sensor.

    3. Remove the gasket from the sensor.