CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL VVT SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the 4 sensors with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the 4 sensor connectors.

2. INSTALL CAMSHAFT POSITION SENSOR

   
   

   1. Install the sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Connect the sensor connector.

3. INSTALL AIR CLEANER HOSE ASSEMBLY

   Click here

4. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here