SFI SYSTEM(w/ Secondary Air Injection System), Diagnostic DTC:P060D

DTC Code DTC Name
P060D Internal Control Module Accelerator Pedal Position Performance

DESCRIPTION

The ECM monitors the input signals of the Accelerator Pedal Position (APP) sensor No. 1. When the input signals and control signals are deviated, a DTC is stored.

DTC Code DTC Detection Condition Trouble Area
P060D

When either condition below is met:


  • An ECM main CPU error.

  • An ECM sub CPU error.

 ECM

PROCEDURE


  1. CHECK DTC


    1. Clear DTC Click here.

    2. Turn the engine switch off.

    3. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

    4. Connect the cable to the negative (-) battery terminal.

    5. Turn the engine switch on (IG).

    6. Check DTC.

      OK
      P060D is not output.

    OK

    CHECK FOR INTERMITTENT PROBLEMS Click here

    NG

    REPLACE ECM Click here