HEATED OXYGEN SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • The exhaust pipe is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe has cooled down before removing it.

PROCEDURE


  1. REMOVE PROPELLER SHAFT HEAT INSULATOR

    Click here

  2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01X0QV

      Disconnect the heated oxygen sensor connector.

    2. A01X17XE02

      Using SST, remove the heated oxygen sensor from the front No. 2 exhaust pipe.

      SST
      09224-00010

  3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A01X3TX

      Detach the clamp and disconnect the heated oxygen sensor connector.

    2. A01X8W8E01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe.

      SST
      09224-00010