KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK SENSOR

   
   
   1. 

      Text in Illustration

      *A	for Bank 2 Sensor 1
      *B	for Bank 1 Sensor 1
      *C	for Bank 2 Sensor 2
      *D	for Bank 1 Sensor 2
      	Front
      	Upper Side
      	Rear

      Install the 4 knock sensors with the 4 bolts so that the knock sensors are angled as shown in the illustration.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   2. Connect the 4 knock sensor connectors.

2. INSTALL NO. 1 ENGINE COVER

3. INSTALL NO. 2 ENGINE COVER

4. INSTALL SEPARATOR CASE

   
   

   1. Install the separator case with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

5. INSTALL NO. 3 ENGINE COVER

   Click here

6. INSTALL NO. 4 ENGINE COVER

   Click here

7. INSTALL NO. 1 EGR PIPE BRACKET

   Click here

8. INSTALL NO. 1 WATER OUTLET PIPE

   Click here

9. CONNECT NO. 11 WATER BY-PASS HOSE

   Click here

10. CONNECT NO. 8 WATER BY-PASS HOSE

    Click here

11. INSTALL NO. 2 WATER BY-PASS PIPE

    Click here

12. INSTALL INTAKE MANIFOLD

    Click here