ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. B001YSX

      Disconnect the engine coolant temperature sensor connector.

    2. Remove the engine coolant temperature sensor.

    3. Remove the gasket from the engine coolant temperature sensor.