IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Using a 16 mm plug wrench, install the 8 spark plugs.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. INSTALL IGNITION COIL ASSEMBLY

   
   

   1. for Bank 2:

      
      

      1. Install the 4 ignition coils with the 4 bolts.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      2. Connect the 4 ignition coil connectors.

      3. Attach the 3 clamps and connect the engine wire.

      4. Connect the water by-pass pipe with the 2 bolts.

         Torque:

         18 N*m  { 184 kgf*cm, 13 ft.*lbf }

   2. for Bank 1:

      
      

      1. Install the 4 ignition coils with the 4 bolts.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      2. Connect the 4 ignition coil connectors.

      3. Attach the 4 clamps and connect the engine wire.

3. INSTALL AIR CLEANER AND HOSE

   
   

   1. Install the air cleaner and hose with the 3 bolts, and then tighten the hose clamp.

      Torque:

      for bolt

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      for hose clamp

      2.5 N*m  { 25 kgf*cm, 22 in.*lbf }

   2. Attach the clamp and connect the mass air flow meter connector.

   3. Connect the No. 2 PCV hose and No. 1 air hose.

4. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here