CRANKSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 2 ENGINE UNDER COVER


    1. Remove the 6 bolts and No. 2 engine under cover.

  2. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR


    1. A01X6PG

      Remove the 2 bolts and crankshaft position sensor protector.

  3. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01XBV1

      Disconnect the crankshaft position sensor connector.

    2. Remove the bolt and crankshaft position sensor.