POWER STEERING OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER APRON TRIM PACKING A

    Click here

  3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ Active Height Control)


    1. A01X5T7

      Disconnect the connector.

    2. Remove the nut, bolt and front height control sensor sub-assembly RH.

  4. DRAIN POWER STEERING FLUID

  5. REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. B001ZGP

      Disconnect the power steering oil pressure switch connector.

    2. Using a 24 mm deep socket wrench, remove the power steering oil pressure switch.

    3. Remove the O-ring from the power steering oil pressure switch.