SFI SYSTEM, Diagnostic DTC:P060B

DTC Code DTC Name
P060B Internal Control Module A/D Processing Performance

DESCRIPTION

This DTC is stored when a communication error occurs in the ECM.

DTC No. DTC Detection Condition Trouble Area
P060B There is an ECM main CPU communication error (1 trip detection logic).

  • ECM

  • Knock sensor

CONFIRMATION DRIVING PATTERN


  1. Turn the engine switch off.

  2. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

  3. Connect the cable to the negative (-) battery terminal.

  4. Turn the engine switch on (IG) and wait for 16 seconds or more.

PROCEDURE


  1. CHECK FOR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Clear DTCs Click here.

    5. Turn the GTS off.

    6. Turn the engine switch off.

    7. Disconnect the GTS.

    8. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

    9. Connect the cable to the negative (-) battery terminal.

    10. Connect the GTS to the DLC3.

    11. Turn the engine switch on (IG) and turn the GTS on.

    12. Wait 16 seconds or more.

    13. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

    14. Check for DTCs.

      Result
      Result Proceed to
      DTC is not output A
      DTC P060B is output B
      DTC P060B and P0327, P0328, P032C, P032D, P0332, P0333, P033C or P033D are output C

    A

    CHECK FOR INTERMITTENT PROBLEMS Click here

    B

    REPLACE ECM Click here

    C

    GO TO DTC P0327, P0328, P032C, P032D, P0332, P0333, P033C OR P033D Click here