CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

      Note:
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the crankshaft position sensor.

   2. Install the crankshaft position sensor with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   3. Connect the sensor connector.

2. Click here

   INSTALL COOLER COMPRESSOR ASSEMBLY

   (Click here)

3. Click here

   INSTALL GENERATOR ASSEMBLY

   (Click here)