ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note

    This accelerator pedal does not require lubrication.

    Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

    If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01X1QQE04
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 nuts and accelerator pedal sensor.