THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER

    Click here

  6. REMOVE NO. 1 AIR CLEANER HOSE

    Click here

  7. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. A01XB35

      Disconnect the No. 5 water by-pass hose.

    2. A01X4CW

      Disconnect the No. 4 water by-pass hose.

    3. A01X7U0

      Disconnect the throttle position sensor and throttle control motor connector.

    4. Remove the 4 bolts, the throttle body with motor, and the gasket.