CAMSHAFT OIL CONTROL VALVE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. Connect the GTS to the DLC3.

    2. Start the engine.

    3. Turn the GTS on.

    4. Inspect the oil control valve (for intake camshaft).


      1. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 1).

      2. Operate the oil control valve using the GTS, and then check the engine speed.

        OK
        Control Range Specified Condition
        OFF Normal engine speed
        ON Rough idle or engine stalls soon after oil control valve switched from OFF to ON

        If the operation is not as specified, check the oil control valve, wire harness and ECM.

      3. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 2).

      4. Operate the oil control valve using the GTS, and then check the engine speed.

        OK
        Control Range Specified Condition
        OFF Normal engine speed
        ON Rough idle or engine stalls soon after oil control valve switched from OFF to ON

        If the operation is not as specified, check the oil control valve, wire harness and ECM.

    5. Inspect the oil control valve (for exhaust camshaft).


      1. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).

      2. Operate the oil control valve using the GTS, and then check the engine speed.

        OK
        Control Range Specified Condition
        -100% Normal engine speed
        100% Rough idle or engine stalls soon after oil control valve switched to 100%

        If the operation is not as specified, check the oil control valve, wire harness and ECM.

      3. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).

      4. Operate the oil control valve using the GTS, and then check the engine speed.

        OK
        Control Range Specified Condition
        -100% Normal engine speed
        100% Rough idle or engine stalls soon after oil control valve switched to 100%

        If the operation is not as specified, check the oil control valve, wire harness and ECM.