IGNITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT IGNITION SWITCH ASSEMBLY


    1. A01XBVLE05
      *1 Component without harness connected: (Ignition Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      All combinations of all terminals LOCK 10 kΩ or higher
      4 (AM1) - 2 (ACC) ACC Below 1 Ω

      4 (AM1) - 2 (ACC)

      4 (AM1) - 1 (IG1)

      5 (AM2) - 6 (IG2)

      		 ON

      4 (AM1) - 1 (IG1)

      4 (AM1) - 3 (ST1)

      5 (AM2) - 6 (IG2)

      		 START

      If the result is not as specified, replace the switch assembly.