| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 2 (B) - 1 (E) | Visor raised | 10 kΩ or higher |
| Visor lowered and mirror cover closed | 10 kΩ or higher | ||
| Visor lowered and mirror cover open | Below 1 Ω | ||
| 1 (B) - 2 (E) | Visor raised | 10 kΩ or higher | |
| Visor lowered and mirror cover closed | 10 kΩ or higher | ||
| Visor lowered and mirror cover open | Below 1 Ω |
| Connector Condition | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | 6 (RILL) - 17 (GND9) | Battery save system (interior light auto cut function) operating → Battery save system (interior light auto cut function) not operating | 11 to 14 V |
| 32 (ILLB) - 17 (GND9) | 11 to 14 V | ||
| 13 (GILL) - 17 (GND9) | Light control switch tail | 11 to 14 V | |
| 6 (RILL) - 17 (GND9) | No. 1 room light on → off | 11 to 14 V | |
| 17 (GND9) - Body ground | Always | Below 1 Ω | |
| 3 (GND5) - Body ground | Always | Below 1 Ω |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | Terminal 1 - Switch body | Pin not pushed | Below 1 Ω |
| Terminal 1 - Switch body | Pin pushed | 10 kΩ or higher |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | Terminal 1 - Switch body | Pin not pushed | Below 1 Ω |
| Terminal 1 - Switch body | Pin pushed | 10 kΩ or higher |
| Connector Condition | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| Component without harness connected | Terminal 1 - Switch body | Pin not pushed | Below 1 Ω |
| Terminal 1 - Switch body | Pin pushed | 10 kΩ or higher |