| Item | Measurement Condition | Specified Condition |
|---|---|---|
| Skid control buzzer assembly | Battery positive (+) voltage → Terminal 2 | Skid control buzzer sounds |
| Battery negative (-) → Terminal 1 |
| Item | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| VSC OFF Switch | 3 (E) - 6 (+) | Pressed | Below 1 Ω |
| Not Pressed | 10 kΩ or higher |
| Item | Tester Connection | Switch Condition | Specified Condition |
|---|---|---|---|
| CRAWL Switch | 15 (SW02) - 10 (E) | Speed Selector switch: Medium |
10 kΩ or higher |
| Speed Selector switch: Medium-high |
|||
| Speed Selector switch: High |
|||
| Speed Selector switch: Low |
Below 1 Ω | ||
| Speed Selector switch: Medium-low |
|||
| 14 (ECU2) - 10 (E) | Speed Selector switch: Medium-low |
10 kΩ or higher | |
| Speed Selector switch: Medium |
|||
| Speed Selector switch: Medium-high |
|||
| Speed Selector switch: Low |
Below 1 Ω | ||
| Speed Selector switch: High |
|||
| 13 (SW04) - 10 (E) | Speed Selector switch: Low |
10 kΩ or higher | |
| Speed Selector switch: Medium-low |
|||
| Speed Selector switch: Medium |
|||
| Speed Selector switch: Medium-high |
Below 1 Ω | ||
| Speed Selector switch: High |
|||
| 16 (HSW) - 10 (E) | ON/OFF switch: Pressed | Below 1 Ω | |
| ON/OFF switch: Not pressed | 10 kΩ or higher | ||
| 12 (ECU) - 10 (E) | Turn assist function switch: Pressed | Below 1 Ω | |
| Turn assist function switch: Not pressed | 10 kΩ or higher |
| Item | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| BRK LP Relay | 3 - 4 | Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 | 10 kΩ or higher |
| Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 | Below 1 Ω | ||
| 3 - 5 | Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 | Below 1 Ω | |
| Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 | 10 kΩ or higher |