| Axle hub bearing looseness | Maximum | 0.05 mm (0.00197 in.) |
| Axle hub runout | Maximum | 0.08 mm (0.00315 in.) |
| Companion flange runout | Vertical | Maximum: 0.10 mm (0.00394 in.) |
| Lateral | ||
| Drive pinion preload (at starting) | New bearing | 3.05 to 3.55 N*m (32 to 36 kgf*cm, 27 to 31 in.*lbf) |
| Reused bearing | 2.22 to 2.53 N*m (23 to 25 kgf*cm, 20 to 22 in.*lbf) | |
| Total preload (at starting) | New bearing | 4.66 to 5.96 N*m (48 to 60 kgf*cm, 42 to 52 in.*lbf) |
| Reused bearing | 3.55 to 4.66 N*m (37 to 47 kgf*cm, 32 to 41 in.*lbf) | |
| Drive pinion to ring gear backlash | 0.17 to 0.27 mm (0.00670 to 0.0106 in.) | |
| Side gear backlash | 0.10 to 0.25 mm (0.00394 to 0.00984 in.) | |
| Front oil seal drive in depth | 5.6 to 6.6 mm (0.221 to 0.259 in.) | |
| Side oil seal drive in depth | LH side | -0.45 to 0.45 mm (-0.0177 to 0.0177 in.) |
| RH side | 4.8 to 5.8 mm (0.189 to 0.228 in.) | |
| Differential carrier straight pin in height | 9.5 to 10.0 mm (0.374 to 0.393 in.) | |
| Side gear thrust washer thickness | 41361-34100 | 1.43 to 1.47 mm (0.0563 to 0.0578 in.) |
| 41361-34110 | 1.48 to 1.52 mm (0.0583 to 0.0598 in.) | |
| 41361-34120 | 1.53 to 1.57 mm (0.0603 to 0.0618 in.) | |
| 41361-34130 | 1.58 to 1.62 mm (0.0622 to 0.0637 in.) | |
| 41361-34140 | 1.63 to 1.67 mm (0.0642 to 0.0657 in.) | |
| 41361-34150 | 1.68 to 1.72 mm (0.0662 to 0.0677 in.) | |
| 41361-34160 | 1.73 to 1.77 mm (0.0682 to 0.0696 in.) | |
| 41361-34170 | 1.78 to 1.82 mm (0.0701 to 0.0716 in.) | |
| 41361-34180 | 1.83 to 1.87 mm (0.0721 to 0.0736 in.) | |
| Plate washer thickness | 90564-50238 | 1.49 to 1.51 mm (0.0587 to 0.0594 in.) |
| 90564-50239 | 1.51 to 1.53 mm (0.0595 to 0.0602 in.) | |
| 90564-50240 | 1.53 to 1.55 mm (0.0603 to 0.0610 in.) | |
| 90564-50241 | 1.55 to 1.57 mm (0.0611 to 0.0618 in.) | |
| 90564-50242 | 1.57 to 1.59 mm (0.0619 to 0.0625 in.) | |
| 90564-50243 | 1.59 to 1.61 mm (0.0626 to 0.0633 in.) | |
| 90564-50244 | 1.61 to 1.63 mm (0.0634 to 0.0641 in.) | |
| 90564-50245 | 1.63 to 1.65 mm (0.0642 to 0.0649 in.) | |
| 90564-50246 | 1.65 to 1.67 mm (0.0650 to 0.0657 in.) | |
| 90564-50247 | 1.67 to 1.69 mm (0.0658 to 0.0665 in.) | |
| 90564-50248 | 1.69 to 1.71 mm (0.0666 to 0.0673 in.) | |
| 90564-50249 | 1.71 to 1.73 mm (0.0674 to 0.0681 in.) | |
| 90564-50250 | 1.73 to 1.75 mm (0.0682 to 0.0688 in.) | |
| 90564-50251 | 1.75 to 1.77 mm (0.0689 to 0.0696 in.) | |
| 90564-50252 | 1.77 to 1.79 mm (0.0697 to 0.0704 in.) | |
| 90564-50253 | 1.79 to 1.81 mm (0.0705 to 0.0712 in.) | |
| 90564-50254 | 1.81 to 1.83 mm (0.0713 to 0.0720 in.) | |
| 90564-50255 | 1.83 to 1.85 mm (0.0721 to 0.0728 in.) | |
| 90564-50256 | 1.85 to 1.87 mm (0.0729 to 0.0736 in.) | |
| 90564-50257 | 1.87 to 1.89 mm (0.0737 to 0.0744 in.) | |
| 90564-50258 | 1.89 to 1.91 mm (0.0745 to 0.0751 in.) | |
| 90564-50259 | 1.91 to 1.93 mm (0.0752 to 0.0759 in.) | |
| 90564-50260 | 1.93 to 1.95 mm (0.0760 to 0.0767 in.) | |
| 90564-50261 | 1.95 to 1.97 mm (0.0768 to 0.0775 in.) | |
| 90564-50262 | 1.97 to 1.99 mm (0.0776 to 0.0783 in.) | |
| 90564-50263 | 1.99 to 2.01 mm (0.0784 to 0.0791 in.) | |
| 90564-50264 | 2.01 to 2.03 mm (0.0792 to 0.0799 in.) | |
| 90564-50265 | 2.03 to 2.05 mm (0.0800 to 0.0807 in.) | |
| 90564-50266 | 2.05 to 2.07 mm (0.0808 to 0.0814 in.) | |
| 90564-50267 | 2.07 to 2.09 mm (0.0815 to 0.0822 in.) | |
| 90564-50268 | 2.09 to 2.11 mm (0.0823 to 0.0830 in.) | |
| 90564-50269 | 2.11 to 2.13 mm (0.0831 to 0.0838 in.) | |
| 90564-50270 | 2.13 to 2.15 mm (0.0839 to 0.0846 in.) | |
| 90564-50271 | 2.15 to 2.17 mm (0.0847 to 0.0854 in.) | |
| 90564-50272 | 2.17 to 2.19 mm (0.0855 to 0.0862 in.) | |
| 90564-50273 | 2.19 to 2.21 mm (0.0863 to 0.0870 in.) | |
| 90564-50274 | 2.21 to 2.23 mm (0.0871 to 0.0877 in.) | |
| 90564-50275 | 2.23 to 2.25 mm (0.0878 to 0.0885 in.) | |
| 90564-50276 | 2.25 to 2.27 mm (0.0886 to 0.0893 in.) | |
| 90564-50277 | 2.27 to 2.29 mm (0.0894 to 0.0901 in.) | |
| 90564-50278 | 2.29 to 2.31 mm (0.0902 to 0.0909 in.) | |
| 90564-50279 | 2.31 to 2.33 mm (0.0910 to 0.0917 in.) | |
| 90564-50280 | 2.33 to 2.35 mm (0.0918 to 0.0925 in.) | |
| Drive pinion washer thickness | 90564-63065 | 1.815 to 1.835 mm (0.0715 to 0.0722 in.) |
| 90564-63066 | 1.840 to 1.860 mm (0.0725 to 0.0732 in.) | |
| 90564-63067 | 1.865 to 1.885 mm (0.0735 to 0.0742 in.) | |
| 90564-63068 | 1.890 to 1.910 mm (0.0744 to 0.0751 in.) | |
| 90564-63069 | 1.915 to 1.935 mm (0.0754 to 0.0761 in.) | |
| 90564-63070 | 1.940 to 1.960 mm (0.0764 to 0.0771 in.) | |
| 90564-63071 | 1.965 to 1.985 mm (0.0774 to 0.0781 in.) | |
| 90564-63072 | 1.990 to 2.010 mm (0.0784 to 0.0791 in.) | |
| 90564-63074 | 2.015 to 2.035 mm (0.0794 to 0.0801 in.) | |
| 90564-63075 | 2.040 to 2.060 mm (0.0804 to 0.0811 in.) | |
| 90564-63076 | 2.065 to 2.085 mm (0.0813 to 0.0820 in.) | |
| 90564-63077 | 2.090 to 2.110 mm (0.0823 to 0.0830 in.) | |
| 90564-63078 | 2.115 to 2.135 mm (0.0833 to 0.0840 in.) | |
| 90564-63079 | 2.140 to 2.160 mm (0.0843 to 0.0850 in.) | |
| 90564-63080 | 2.165 to 2.185 mm (0.0853 to 0.0860 in.) | |
| 90564-63081 | 2.190 to 2.210 mm (0.0863 to 0.0870 in.) | |
| 90564-63082 | 2.215 to 2.235 mm (0.0872 to 0.0879 in.) | |
| 90564-63083 | 2.240 to 2.260 mm (0.0882 to 0.0889 in.) | |
| 90564-63084 | 2.265 to 2.285 mm (0.0892 to 0.0899 in.) | |
| Companion flange runout | Vertical | Maximum: 0.10 mm (0.00394 in.) | |
| Lateral | |||
| Ring gear runout | Maximum: 0.05 mm (0.00197 in.) | ||
| Drive pinion to ring gear backlash | 0.10 to 0.20 mm (0.00394 to 0.00787 in.) | ||
| Drive pinion preload (at starting) | 3.307 | New bearing | 1.67 to 2.57 N*m (18 to 26 kgf*cm, 15 to 22 in.*lbf) |
| Reused bearing | 0.87 to 1.22 N*m (9 to 12 kgf*cm, 8 to 10 in.*lbf) | ||
| 3.909 4.300 |
New bearing | 1.08 to 1.73 N*m (12 to 17 kgf*cm, 10 to 15 in.*lbf) | |
| Reused bearing | 0.89 to 1.41 N*m (10 to 14 kgf*cm, 8 to 12 in.*lbf) | ||
| Total preload (at starting) | 3.307 | New bearing | 2.12 to 3.30 N*m (22 to 33 kgf*cm, 19 to 29 in.*lbf) |
| Reused bearing | 1.32 to 1.95 N*m (14 to 19 kgf*cm, 12 to 17 in.*lbf) | ||
| 3.909 4.300 |
New bearing | 1.46 to 2.36 N*m (15 to 24 kgf*cm, 13 to 20 in.*lbf) | |
| Reused bearing | 1.27 to 2.04 N*m (13 to 20 kgf*cm, 12 to 18 in.*lbf) | ||
| Differential case runout | Maximum: 0.04 mm (0.00157 in.) | ||
| Side gear backlash | 0.02 to 0.15 mm (0.000788 to 0.00590 in.) | ||
| Adjusting shim thickness | 41361-60560 | 1.53 to 1.57 mm (0.0603 to 0.0618 in.) | |
| 41361-60570 | 1.58 to 1.62 mm (0.0622 to 0.0637 in.) | ||
| 41361-60580 | 1.63 to 1.67 mm (0.0642 to 0.0657 in.) | ||
| 41361-60590 | 1.68 to 1.72 mm (0.0662 to 0.0677 in.) | ||
| 41361-60600 | 1.73 to 1.77 mm (0.0682 to 0.0696 in.) | ||
| 41361-60610 | 1.78 to 1.82 mm (0.0701 to 0.0716 in.) | ||
| 41361-60620 | 1.83 to 1.87 mm (0.0721 to 0.0736 in.) | ||
| 41361-60630 | 1.88 to 1.92 mm (0.0741 to 0.0755 in.) | ||
| 41361-60640 | 1.93 to 1.97 mm (0.0760 to 0.0775 in.) | ||
| 41361-60650 | 1.98 to 2.02 mm (0.0780 to 0.0795 in.) | ||
| 41361-60660 | 2.03 to 2.07 mm (0.0800 to 0.0814 in.) | ||
| 41361-60670 | 2.08 to 2.12 mm (0.0819 to 0.0834 in.) | ||
| Plate washer thickness | 90564-40004 | 1.04 to 1.06 mm (0.0410 to 0.0417 in.) | |
| 90564-40006 | 1.065 to 1.085 mm (0.0420 to 0.0427 in.) | ||
| 90564-40007 | 1.09 to 1.11 mm (0.0430 to 0.0437 in.) | ||
| 90564-40008 | 1.115 to 1.135 mm (0.0439 to 0.0446 in.) | ||
| 90564-40009 | 1.14 to 1.16 mm (0.0449 to 0.0456 in.) | ||
| 90564-40010 | 1.165 to 1.185 mm (0.0459 to 0.0466 in.) | ||
| 90564-40011 | 1.19 to 1.21 mm (0.0469 to 0.0476 in.) | ||
| 90564-40012 | 1.215 to 1.235 mm (0.0479 to 0.0486 in.) | ||
| 90564-40013 | 1.24 to 1.26 mm (0.0489 to 0.0496 in.) | ||
| 90564-40014 | 1.265 to 1.285 mm (0.0498 to 0.0505 in.) | ||
| 90564-40015 | 1.29 to 1.31 mm (0.0508 to 0.0515 in.) | ||
| 90564-40016 | 1.315 to 1.335 mm (0.0518 to 0.0525 in.) | ||
| 90564-40017 | 1.34 to 1.36 mm (0.0528 to 0.0535 in.) | ||
| 90564-40018 | 1.365 to 1.385 mm (0.0538 to 0.0545 in.) | ||
| 90564-40019 | 1.39 to 1.41 mm (0.0548 to 0.0555 in.) | ||
| 90564-40020 | 1.415 to 1.435 mm (0.0557 to 0.0564 in.) | ||
| 90564-40021 | 1.44 to 1.46 mm (0.0567 to 0.0574 in.) | ||
| 90564-40022 | 1.465 to 1.485 mm (0.0577 to 0.0584 in.) | ||
| 90564-40023 | 1.49 to 1.51 mm (0.0587 to 0.0594 in.) | ||
| 90564-40024 | 1.515 to 1.535 mm (0.0597 to 0.0604 in.) | ||
| 90564-40025 | 1.54 to 1.56 mm (0.0607 to 0.0614 in.) | ||
| Companion flange runout | Vertical | Maximum: 0.10 mm (0.00394 in.) |
| Lateral | ||
| Ring gear runout | Maximum: 0.05 mm (0.00197 in.) | |
| Drive pinion to ring gear backlash | 0.10 to 0.20 mm (0.00394 to 0.00787 in.) | |
| Drive pinion preload (at starting) | New bearing | 1.08 to 1.73 N*m (12 to 17 kgf*cm, 10 to 15 in.*lbf) |
| Reused bearing | 0.89 to 1.41 N*m (10 to 14 kgf*cm, 8 to 12 in.*lbf) | |
| Total preload (at starting) | New bearing | 1.46 to 2.36 N*m (15 to 24 kgf*cm, 13 to 20 in.*lbf) |
| Reused bearing | 1.27 to 2.04 N*m (13 to 20 kgf*cm, 12 to 18 in.*lbf) | |
| Differential case runout | Maximum: 0.04 mm (0.00157 in.) | |
| Side gear thrust washer thickness (reference) | 1.97 to 2.06 mm (0.0776 to 0.0811 in.) | |
| Clutch plate thickness (reference) | 1.97 to 2.03 mm (0.0776 to 0.0799 in.) | |
| Compression spring length (reference) | 32.8 mm (1.29134 in.) | |
| Differential carrier oil seal depth | 0.05 to 0.95 mm (0.00197 to 0.0374 in.) | |
| Side gear backlash | 0.02 to 0.15 mm (0.000788 to 0.00590 in.) | |
| Plate washer thickness | 90564-40004 | 1.04 to 1.06 mm (0.0410 to 0.0417 in.) |
| 90564-40006 | 1.065 to 1.085 mm (0.0420 to 0.0427 in.) | |
| 90564-40007 | 1.09 to 1.11 mm (0.0430 to 0.0437 in.) | |
| 90564-40008 | 1.115 to 1.135 mm (0.0439 to 0.0446 in.) | |
| 90564-40009 | 1.14 to 1.16 mm (0.0449 to 0.0456 in.) | |
| 90564-40010 | 1.165 to 1.185 mm (0.0459 to 0.0466 in.) | |
| 90564-40011 | 1.19 to 1.21 mm (0.0469 to 0.0476 in.) | |
| 90564-40012 | 1.215 to 1.235 mm (0.0479 to 0.0486 in.) | |
| 90564-40013 | 1.24 to 1.26 mm (0.0489 to 0.0496 in.) | |
| 90564-40014 | 1.265 to 1.285 mm (0.0498 to 0.0505 in.) | |
| 90564-40015 | 1.29 to 1.31 mm (0.0508 to 0.0515 in.) | |
| 90564-40016 | 1.315 to 1.335 mm (0.0518 to 0.0525 in.) | |
| 90564-40017 | 1.34 to 1.36 mm (0.0528 to 0.0535 in.) | |
| 90564-40018 | 1.365 to 1.385 mm (0.0538 to 0.0545 in.) | |
| 90564-40019 | 1.39 to 1.41 mm (0.0548 to 0.0555 in.) | |
| 90564-40020 | 1.415 to 1.435 mm (0.0557 to 0.0564 in.) | |
| 90564-40021 | 1.44 to 1.46 mm (0.0567 to 0.0574 in.) | |
| 90564-40022 | 1.465 to 1.485 mm (0.0577 to 0.0584 in.) | |
| 90564-40023 | 1.49 to 1.51 mm (0.0587 to 0.0594 in.) | |
| 90564-40024 | 1.515 to 1.535 mm (0.0597 to 0.0604 in.) | |
| 90564-40025 | 1.54 to 1.56 mm (0.0607 to 0.0614 in.) | |
| Companion flange runout | Vertical | Maximum: 0.10 mm (0.00394 in.) | |
| Lateral | |||
| Ring gear runout | Maximum: 0.05 mm (0.00197 in.) | ||
| Drive pinion to ring gear backlash | 0.10 to 0.20 mm (0.00394 to 0.00787 in.) | ||
| Drive pinion preload (at starting) | New bearing | 1.08 to 1.73 N*m (12 to 17 kgf*cm, 10 to 15 in.*lbf) | |
| Reused bearing | 0.89 to 1.41 N*m (10 to 14 kgf*cm, 8 to 12 in.*lbf) | ||
| Total preload (at starting) | New bearing | 1.37 to 2.22 N*m (14 to 22 kgf*cm, 13 to 19 in.*lbf) | |
| Reused bearing | 1.18 to 1.90 N*m (13 to 19 kgf*cm, 11 to 16 in.*lbf) | ||
| Differential case runout | Maximum: 0.04 mm (0.00157 in.) | ||
| Side gear backlash | 0.02 to 0.15 mm (0.00787 to 0.00591 in.) | ||
| Differential carrier oil seal depth | 0.05 to 0.95 mm (0.00197 to 0.0374 in.) | ||
| Thrust washer thickness | 41361-60680 | 1.53 to 1.57 mm (0.0603 to 0.0618 in.) | |
| 41361-60690 | 1.58 to 1.62 mm (0.0622 to 0.0637 in.) | ||
| 41361-60700 | 1.63 to 1.67 mm (0.0642 to 0.0657 in.) | ||
| 41361-60710 | 1.68 to 1.72 mm (0.0662 to 0.0677 in.) | ||
| 41361-60720 | 1.73 to 1.77 mm (0.0682 to 0.0696 in.) | ||
| 41361-60730 | 1.78 to 1.82 mm (0.0701 to 0.0716 in.) | ||
| 41361-60740 | 1.83 to 1.87 mm (0.0721 to 0.0736 in.) | ||
| 41361-60750 | 1.88 to 1.92 mm (0.0741 to 0.0755 in.) | ||
| 41361-60760 | 1.93 to 1.97 mm (0.0760 to 0.0775 in.) | ||
| 41361-60770 | 1.98 to 2.02 mm (0.0780 to 0.0795 in.) | ||
| 41361-60780 | 2.03 to 2.07 mm (0.0800 to 0.0814 in.) | ||
| 41361-60790 | 2.08 to 2.12 mm (0.0819 to 0.0834 in.) | ||
| Side plate washer thickness | 01 | 90201-79001 | 2.66 to 2.68 mm (0.1048 to 0.1055 in.) |
| 02 | 90201-79002 | 2.69 to 2.71 mm (0.1059 to 0.1066 in.) | |
| 03 | 90201-79003 | 2.72 to 2.74 mm (0.1071 to 0.1078 in.) | |
| 04 | 90201-79004 | 2.75 to 2.77 mm (0.1083 to 0.1090 in.) | |
| 05 | 90201-79005 | 2.78 to 2.80 mm (0.1095 to 0.1102 in.) | |
| 06 | 90201-79006 | 2.81 to 2.83 mm (0.1107 to 0.1114 in.) | |
| 07 | 90201-79007 | 2.84 to 2.86 mm (0.1119 to 0.1125 in.) | |
| 08 | 90201-79008 | 2.87 to 2.89 mm (0.1130 to 0.1137 in.) | |
| 09 | 90201-79009 | 2.90 to 2.92 mm (0.1142 to 0.1149 in.) | |
| 10 | 90201-79010 | 2.93 to 2.95 mm (0.1154 to 0.1161 in.) | |
| 11 | 90201-79011 | 2.96 to 2.98 mm (0.1166 to 0.1173 in.) | |
| 12 | 90201-79012 | 2.99 to 3.01 mm (0.1178 to 0.1185 in.) | |
| 13 | 90201-79013 | 3.02 to 3.04 mm (0.1189 to 0.1196 in.) | |
| 14 | 90201-79014 | 3.05 to 3.07 mm (0.1201 to 0.1208 in.) | |
| 15 | 90201-79015 | 3.08 to 3.10 mm (0.1213 to 0.1220 in.) | |
| 16 | 90201-79016 | 3.11 to 3.13 mm (0.1225 to 0.1232 in.) | |
| 17 | 90201-79017 | 3.14 to 3.16 mm (0.1237 to 0.1245 in.) | |
| 18 | 90201-79018 | 3.17 to 3.19 mm (0.1248 to 0.1255 in.) | |
| 19 | 90201-79019 | 3.20 to 3.22 mm (0.1260 to 0.1267 in.) | |
| 20 | 90201-79020 | 3.23 to 3.25 mm (0.1272 to 0.1279 in.) | |
| 21 | 90201-79021 | 3.26 to 3.28 mm (0.1284 to 0.1291 in.) | |
| 22 | 90201-79022 | 3.29 to 3.31 mm (0.1296 to 0.1303 in.) | |
| 23 | 90201-79023 | 3.32 to 3.34 mm (0.1307 to 0.1314 in.) | |
| Plate washer thickness | 90564-40004 | 1.04 to 1.06 mm (0.0410 to 0.0417 in.) | |
| 90564-40006 | 1.065 to 1.085 mm (0.0420 to 0.0427 in.) | ||
| 90564-40007 | 1.09 to 1.11 mm (0.0430 to 0.0437 in.) | ||
| 90564-40008 | 1.115 to 1.135 mm (0.0439 to 0.0446 in.) | ||
| 90564-40009 | 1.14 to 1.16 mm (0.0449 to 0.0456 in.) | ||
| 90564-40010 | 1.165 to 1.185 mm (0.0459 to 0.0466 in.) | ||
| 90564-40011 | 1.19 to 1.21 mm (0.0469 to 0.0476 in.) | ||
| 90564-40012 | 1.215 to 1.235 mm (0.04789 to 0.0486 in.) | ||
| 90564-40013 | 1.24 to 1.26 mm (0.0489 to 0.0496 in.) | ||
| 90564-40014 | 1.265 to 1.285 mm (0.0498 to 0.0505 in.) | ||
| 90564-40015 | 1.29 to 1.31 mm (0.0508 to 0.0515 in.) | ||
| 90564-40016 | 1.315 to 1.335 mm (0.0518 to 0.0525 in.) | ||
| 90564-40017 | 1.34 to 1.36 mm (0.0528 to 0.0535 in.) | ||
| 90564-40018 | 1.365 to 1.385 mm (0.0538 to 0.0545 in.) | ||
| 90564-40019 | 1.39 to 1.41 mm (0.0548 to 0.0555 in.) | ||
| 90564-40020 | 1.415 to 1.435 mm (0.0557 to 0.0564 in.) | ||
| 90564-40021 | 1.44 to 1.46 mm (0.0567 to 0.0574 in.) | ||
| 90564-40022 | 1.465 to 1.485 mm (0.0577 to 0.0584 in.) | ||
| 90564-40023 | 1.49 to 1.51 mm (0.0587 to 0.0595 in.) | ||
| 90564-40024 | 1.515 to 1.535 mm (0.0597 to 0.0604 in.) | ||
| 90564-40025 | 1.54 to 1.56 mm (0.0607 to 0.0614 in.) | ||