| Starter assembly | No-load characteristics current | 150 A or less at 11.5 V | |
| Starter armature assembly | Standard resistance | Segment -Segment | Below 1 Ω |
| Segment - Armature coil core | 10 kΩ or higher | ||
| Maximum circle runout | 0.05 mm (0.00197 in.) | ||
| Standard commutator diameter | 29 mm (1.14 in.) | ||
| Minimum commutator diameter | 28 mm (1.10 in.) | ||
| Standard undercut depth | 0.4 mm (0.0157 in.) | ||
| Minimum undercut depth | 0.2 mm (0.00787 in.) | ||
| Brush length | Standard length | 14.4 mm (0.567 in.) | |
| Minimum length | 9.0 mm (0.354 in.) | ||
| Brush spring | Standard spring installed load | 22 to 27 N (2 to 3 kgf, 5.0 to 6.1 lbf) | |
| Minimum spring installed load | 14 N (1 kgf, 3.1 lbf) | ||
| Magnet starter switch assembly | Standard resistance | Terminal 50 - Terminal C | Below 1 Ω |
| Terminal 50 - Switch body | Below 2 Ω | ||
| Starter relay | Standard resistance | 3 - 5 | 10 kΩ or higher (Battery voltage is not applied to terminals 1 and 2) |
| Below 1 Ω (Battery voltage is applied to terminals 1 and 2) | |||
| Starter cut relay | Standard resistance | 3 - 5 | 10 kΩ or higher (Battery voltage is not applied to terminals 1 and 2) |
| Below 1 Ω (Battery voltage is applied to terminals 1 and 2) | |||
| ACC relay (Main body ECU) | Standard resistance | 2A-1 - 2D-8 | 10 kΩ or higher (Battery voltage is not applied between 2D-45 and 2D- 62) |
| Below 1 Ω (Battery voltage is applied between 2D-45 and 2D- 62) | |||
| Engine switch | Standard resistance | 7 - 5 | Below 1 Ω (Engine switch is pushed) |
| 2 - 5 | Below 1 Ω (Engine switch is pushed) | ||
| 7 - 5 | 10 kΩ or higher (Engine switch is not pushed) | ||
| 2 - 5 | 10 kΩ or higher (Engine switch is not pushed) | ||