| Starter assembly | No-load characteristics current | 200 A or less at 11 V | |
| Starter armature assembly | Standard resistance | Commutator | Below 1 Ω |
| Commutator - Armature coil core | 10 kΩ or higher | ||
| Maximum circle runout | 0.05 mm (0.00197 in.) | ||
| Standard commutator diameter | 36.0 mm (1.42 in.) | ||
| Minimum commutator diameter | 35.0 mm (1.38 in.) | ||
| Standard undercut depth | 0.7 mm (0.0276 in.) | ||
| Minimum undercut depth | 0.2 mm (0.00787 in.) | ||
| Starter yoke assembly | Standard resistance | Terminal C plate - Brushes | Below 1 Ω |
| Brushes - Starter yoke body | 10 kΩ or higher | ||
| Brush length | Standard length | 21.0 mm (0.827 in.) | |
| Minimum length | 12.0 mm (0.472 in.) | ||
| Starter brush holder assembly | Standard resistance | Positive (+) brush holder - Negative (-) brush holder | 10 kΩ or higher |
| Brush spring | Standard spring installed load | 36 N (3.6 kgf, 8.0 lbf) | |
| Minimum spring installed load | 12 N (1.2 kgf, 2.7 lbf) | ||
| Magnet starter switch assembly | Standard resistance | Terminal 50 - Terminal C | Below 1 Ω |
| Terminal 50 - Housing body | Below 2 Ω | ||
| Glow plug | Standard resistance (w/o DPF) |
Glow plug terminal - Body ground | Approximately 1 Ω at 20°C (68°F) |
| Standard resistance (w/ DPF) |
0.7 Ω or higher at 20°C (68°F) | ||