Click here
Table 1. FUEL SYSTEM
| Standard fuel pressure |
at idle |
321 to 327 kPa (3.27 to 3.33 kgf/cm2, 46.5 to 47.4 psi) |
| remains for 5 minutes after engine has stopped |
147 kPa (1.5 kgf/cm2, 21 psi) or more |
Table 2. FUEL INJECTOR
| Standard resistance |
1 - 2 |
20°C (68°F) |
11.6 to 12.4 Ω |
| Standard injection volume |
82 to 99 cc (5.0 to 6.0 cu. in.) per 15 seconds |
| Difference between each fuel injector |
17 cc (1.2 cu. in.) or less |
| Standard fuel drop |
1 drop or less in 12 minutes |
Table 3. FUEL PUMP
| Standard resistance |
1 - 2 |
20°C (68°F) |
0.2 to 3.0 Ω |
Table 4. FUEL SENDER GAUGE ASSEMBLY
| Voltage |
Float position is F (upper) |
Standard |
4.25 to 4.61 V* |
| Float level is E (Lower) |
Standard |
0.34 to 0.70 V* |
*: The output voltage changes depending on the voltage applied to the terminals.
Table 5. FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)
| Voltage |
Float position is F (upper) |
Standard |
4.25 to 4.61 V* |
| Float level is E (Lower) |
Standard |
0.34 to 0.70 V* |
*: The output voltage changes depending on the voltage applied to the terminals.