REPAIR INSTRUCTION CUSTOMIZE PARAMETERS

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

   Tilt & Telescopic

   Display	Default	Contents	Setting
   Autoaway / Return function	ON	Turn the auto away/return function ON/OFF	ON/OFF

2. TOYOTA PARKING ASSIST-SENSOR SYSTEM

   Warning

   Display	Default	Contents	Setting
   Rr Sensor Onset Range	Wide	Sets the buzzer activation range for the rear sensors.	Narrow or Wide
   Keep Sense Buzzer	Avail	Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.	Not Avail or Avail
   Fr & Rr Buzzer Volume	H	Changes the buzzer volume setting.	L, M1, M2, M3 or H

   Sensor

   Display	Default	Contents	Setting
   Sensor Condition N	Avail	Makes the sensors available when the shift lever is in N.	Not Avail or Avail
   Front Side Dist Sensor	Long	Sets the buzzer activation range for the front sensors.	Short or Long
   Reverse Range Front Sensor	Fsde	Changes the operation setting for the vehicle front sensors when the shift lever is in R.	F, Fs,Fc, Fsde or F Stop
   Non P/R Range Rear Sensor	R Stop	Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.	R, Rcrn or R Stop

   Display

   Display	Default	Contents	Setting
   Approach Display OFF	Avail	The display when moving away from a previously detected obstacle.	Not Avail or Avail
   Display Mode	All	The display mode setting (when the intuitive parking assist system is normal).	All or Undisp

3. POWER DOOR LOCK CONTROL SYSTEM

   Door Lock

   Display	Default	Contents	Setting
   Unlock Key Twice	OFF	Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors.	ON/OFF

4. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

   Wireless Door Lock

   Display	Default	Contents	Setting
   Hazard Answer Back	ON	When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.	ON/OFF
   Wireless Control	ON	Function that turns the wireless door lock function ON or OFF.	ON/OFF
   Open Door Warning*1	ON	If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.	ON/OFF
   Panic Alarm Function*2	ON	Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds.	ON/OFF
   Unlock 2 Operation	OFF	Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock.	ON/OFF
   Auto Lock Time	30 s	Function to change the time until relocking after unlocking with the wireless door lock function.	30 s/60 s/120 s
   Wireless Auto Lock	ON	Function to control the automatic relocking of doors after unlocking with the wireless door lock function.	ON/OFF
   Wireless Buzzer Resp	ON*3	Wireless buzzer response function.	ON/OFF
   Wireless Buzzer Volume	Level 7	This function changes the wireless buzzer volume.	Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

   Tech Tips

   *1: Except China

   *2: w/ Panic Switch

   *3: Except Europe and China

   PSD & PBD Operation (w/ Power Back Door System)

   Display	Default	Contents	Setting
   Wireless PBD Operation	0.8 s 1Motion*	Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off). Function to turn on/off the power back door wireless one motion open operation.*	1 Oper or 2 Oper or 0.8 s or OFF 1Motion or 1 Oper or 2 Oper or 0.8 s or OFF*

   Tech Tips

   *: Except Europe

5. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

   Wireless Door Lock

   Display (item)	Default	Function	Setting
   Wireless Control	ON	The function that turns the wireless door lock on or off.	ON or OFF
   Hazard Answer Back	ON	When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice.	ON or OFF
   Open Door Warning	ON	If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.	ON or OFF
   Auto Lock Time	30 s	The function that changes the time until relocking after unlocking the doors with the wireless door lock function.	30 s, 60 s or 120 s
   Wireless Buzzer Resp	ON	This function turns the wireless door lock buzzer response on or off.	ON or OFF

6. ENTRY AND START SYSTEM (for Entry Function)

   Entry & Start

   Display	Default	Contents	Setting
   Ignition Available Area (Entry ignition available area)	All	Function to choose the available area for the key to start the engine and cancel the steering lock.	Front/All*
   Park Wait Time (Waiting time to permit unlocking door after locking)	2.5s	Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function.	0.5s/1.5s/2.5s/5s
   Back Door Opening Operation (Back door open mode when vehicle is locked)	Long	Back door opening the operation.	Long/Twice/OFF

   Warning

   Display	Default	Contents	Setting
   Passenger Take Key	ON	Warn a key is taken out by fellow passengers	ON/OFF
   Key Low Battery Warning (Warn when key battery becomes weak)	ON	Function that warns the driver that the key battery power is low.	ON/OFF
   Key Out Range Warning	ON	Warn Starting E/G when the key is out of range	ON/OFF

   Tech Tips

   *: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.

   PSD & PBD Operation (w/ Power Back Door System)

   Display	Default	Contents	Setting
   Wireless PBD Operation	0.8 s (1Motion)*	Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off). (Function to turn on/off the power back door wireless one motion open operation.)*	1 Oper or 2 Oper or 0.8 s or OFF (1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*

   Tech Tips

   *: Except Europe

7. ENTRY UNLOCK MODE SWITCHING FUNCTION

   
   

   1. To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

      
      

      • When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.

      Note

      After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

      
      

      • All door unlock mode (default):

        When a touch sensor is touched, all doors unlock.

      • Driver door unlock mode:

        When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

   2. The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.

   3. 

      *1	w/ Multi-information Display:
      *2	Multi-information Display
      *3	w/o Multi-information Display:

      The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

      Tech Tips

      The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.

      
      

      • All door unlock mode:

        

        Tech Tips

        
        

        • *1: except China.

        • *2: For vehicles with the multi-information display.

      • Driver door unlock mode:

        

        Tech Tips

        
        

        • *1: except China.

        • *2: For vehicles with the multi-information display.

        • The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.

8. KEY CANCEL

   The key cancel operation disables the following functions:

   
   

   • Entry Unlock/Lock

   • Key Lock-in Prevention

   • Memory Call

   • Entry Back Door Open

   • Warning

   • Entry Ignition

   
   

   1. The operation procedures are as follows:

      Precondition:

      Engine switch off, driver side door closed and unlocked.

      
      

      1. Unlock the driver side door once with the unlock switch of the key.

      2. Open the driver door within 5 seconds.

      3. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

      4. Perform close → open twice for the driver door within 30 seconds.

         (Driver door: Open condition → Close → Open → Close → Open)

      5. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

      6. Perform close → open once for the driver door within 30 seconds.

         (Driver door: Open condition → Close → Open)

      7. Close the driver door within 5 seconds.

         When key cancel is activated, the wireless door lock buzzer sounds twice.

         To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.

9. ENTRY AND START SYSTEM (for Start Function)

   Entry & Start

   Display	Default	Content	Setting
   Ignition Available Area	All	Function to choose the available area for the key to start the engine and cancel the steering lock.	Front/All

10. THEFT DETERRENT SYSTEM (w/ Entry and Start System)

    Security

    Display	Default	Contents	Setting
    Warning by Horn*1	ON	Function that allows vehicle horns and security horn to be used as warning device.	ON/OFF
    Warning by Glass Broken Sensor*2	ON	Function that turns the glass breakage sensor on/off.	ON/OFF

    Tech Tips

    
    

    • *1: w/ Security Horn

    • *2: w/ Glass Breakage Sensor

11. THEFT DETERRENT SYSTEM (w/o Entry and Start System)

    Security

    Display	Default	Contents	Setting
    Warning by Horn	ON	Function that allows the vehicle horns and security horn to be used as warning devices.	ON/OFF

12. METER AND GAUGE SYSTEM

    Warning

    Display (Item)	Default	Contents	Setting
    Driver Side Seatbelt Warning Buzzer	ON	To change the seat-belt warning buzzer.	ON / OFF
    Front Passenger Side Seatbelt Warning Buzzer	ON	To change the seat-belt warning buzzer.	ON / OFF

    Unit Conversion

    Display (Item)	Default	Contents	Setting
    Units By Region	Different for each vehicle	To change the units of the display.	Km/l JP / Km/l / Ml/g US / Ml/g UK

    Display

    Display (Item)	Default	Contents	Setting
    Eco Drive Indicator Zone	ON	To change the eco driving indicator zone display.	ON / OFF
    Language	None	To change the language of the display.	Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd

13. SEAT BELT WARNING SYSTEM

    Seat Belt Warning

    Display	Default	Contents	Setting	Relevant ECU
    D-Seatbelt Warning Buzzer*1	ON	If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.	ON or OFF	Combination meter assembly
    P-Seatbelt Warning Buzzer*1, *2	ON	If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer.	ON or OFF	Combination meter assembly

    
    

    • *1: w/ Seat Belt Warning Buzzer

    • *2: w/ Airbag System

14. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

    Air Conditioner

    Display	Default	Contents	Setting	Relevant ECU
    Set Temperature Shift	Normal	Function to set the temperature shift.	+2 C/+1 C/Normal/-1 C/-2 C	Air conditioning amplifier assembly
    Compressor/Air Inlet DEF operation	Link	Function to automatically turn the A/C on when the FRONT DEF button is pressed.	Normal/Link	Air conditioning amplifier assembly
    Compressor Mode	Automatic	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C switch is off.	Manual/Automatic	Air conditioning amplifier assembly
    Air Inlet Mode	Automatic	Function to automatically change to recirculation mode when the A/C is turned on.	Manual/Automatic	Air conditioning amplifier assembly
    Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.	ON/OFF	Air conditioning amplifier assembly
    Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the defroster is on.	ON/OFF	Air conditioning amplifier assembly
    Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature.	+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C	Air conditioning amplifier assembly
    Add Foot Air in FACE Mode	ON	When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.	ON/OFF	Air conditioning amplifier assembly

15. AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

    Air Conditioner

    Display	Default	Content	Setting	Relevant ECU
    Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature.	+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C	Air conditioning amplifier assembly

16. POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows)

    Power Window

    Display (Item)	Default	Contents	Setting
    Door Key P/W Up	OFF	Function that raises all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.	ON/OFF
    Door Key P/W Down	OFF	Function that lowers all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 sec.	ON/OFF
    P/W Up W/ Transmit	OFF	Function that raises all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.	ON/OFF
    P/W Down W/ Transmit	OFF	Function that lowers all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.	ON/OFF
    P/W Up W/ Smart	OFF	Function that raises all the power windows when, with the ignition switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.	ON/OFF

17. SLIDING ROOF SYSTEM

    Slide Roof

    Display (Item)	Default	Contents	Setting
    Door Key Related Open	ON	The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.	ON/OFF
    Door Key Related Close	ON	The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off.	ON/OFF
    Wireless Key Related Open	ON	The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off.	ON/OFF
    Wireless Key Related Close	OFF	The function to manually close the sliding roof linked with the power window if pressing the transmitter lock switch for 3 seconds or more when the engine switch is off.	ON/OFF
    Door Handle Lock Button	ON	The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle.	ON/OFF
    Door Key Related Operation	Slide	The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off.	Tilt/Slide
    Wireless Key Related Operation	Slide	The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off.	Tilt/Slide

18. POWER BACK DOOR SYSTEM

    PSD&PBD operation

    Display	Default	Contents	Setting
    PBD SW Operation	0.8 s	Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 sec.	0.8s or ON
    PBD Buzzer	ON	Function that makes the power back door buzzer sound when power back door is operating	ON or OFF
    Wireless PBD Operation	0.8 s (1Motion)*	Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off). (Function to turn on/off the power back door wireless one motion open operation.)*	1 Oper or 2 Oper or 0.8 s or OFF (1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*

    Tech Tips

    *: Except Europe

19. LIGHTING SYSTEM

    Main Body

    Display	Default	Contents	Setting
    Lighting Time	15s	To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).	7.5s/15s/30s
    I/L when ACC OFF	ON	Function to light the interior light when the ignition switch is turned from ON to off.	ON/OFF
    I/L ON W/Door Key Unlock	ON	Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.	ON/OFF
    Room Light when Aprchd	ON	Dome light illumination (when approaching vehicle)	ON/OFF
    Disp Ex ON Sen	Normal	Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1	Light2/Light1/Normal/Dark1/Dark2
    Disp Ex OFF Sen	Normal	Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2	Light2/Light1/Normal/Dark1/Dark2
    Sensitivity	Normal	Function to adjust the ambient light sensitivity of the automatic light control system.*3	Light2/Light1/Normal/Dark1/Dark2

    Tech Tips

    The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

    Figure 1. *1

    

    Tech Tips

    When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

    Figure 2. *2

    

    Tech Tips

    When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

    Figure 3. *3

    

    Tech Tips

    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)