STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

    Click here

  4. REMOVE STARTER COVER


    1. B001XNV

      Remove the 3 bolts and starter cover.

  5. REMOVE STARTER ASSEMBLY


    1. B001YOW

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. B001VQJ

      Remove the 2 bolts and starter.

    4. B001ZB8

      Remove the flywheel housing side cover.