ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER SPACER

   
   

   1. Apply a light coat of engine oil to a new gasket.

   2. Install the gasket to the oil cooler spacer.

   3. Install the oil cooler spacer to the oil filter bracket with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Apply a light coat of engine oil to 2 new O-rings.

   2. Install the 2 O-rings to the oil cooler.

   3. Install the oil cooler with the 5 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

3. INSTALL OIL FILTER BRACKET

   
   

   1. Apply a light coat of engine oil to 2 new O-rings.

   2. Install the 2 O-rings to the timing chain cover.

   3. Install the oil filter bracket with the 2 nuts and 2 bolts.

      Torque:

      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

4. INSTALL NO. 1 OIL COOLER BRACKET

   
   

   1. Connect the ground wire to the cylinder block.

   2. Install the oil cooler bracket with the 2 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

5. INSTALL NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

   Click here

6. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

   Click here

7. INSTALL OIL FILTER ELEMENT

   Click here

8. CONNECT COOLER COMPRESSOR ASSEMBLY

   Click here

9. INSTALL RADIATOR ASSEMBLY

   Click here

10. ADD ENGINE OIL

    Click here

11. INSPECT ENGINE OIL LEVEL

    Click here

12. INSPECT FOR OIL LEAK

    Click here