OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER


    1. B001ZL5

      Remove the 2 bolts and No. 2 engine under cover.

  5. DRAIN ENGINE OIL

    Click here

  6. DISCONNECT OIL COOLER TUBE


    1. A01X1C4

      Remove the 2 bolts and disconnect the oil cooler tube.

  7. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the oil level sensor connector.

    2. B001YY7

      Remove the 4 bolts and oil level sensor.

    3. B001ZQEE01
      Text in Illustration
      *1 Cutting Position
      *2 Supply Part

      Cut away part of the gasket and remove the gasket from the engine oil level sensor.

      Tech Tips

      Remove the only the outer part of the gasket.