ENGINE OIL COOLER INSTALLATION

PROCEDURE


  1. INSTALL OIL COOLER ASSEMBLY


    1. Install a new seal washer to the bolt.

    2. Install the oil cooler with the bolt and nut.

      Torque:
      for bolt
      68 N*m  { 693 kgf*cm, 50 ft.*lbf }
      for nut
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
    3. A01X3GVE03
      Text in Illustration
      *a Upward
      *b Rearward

      Install the 2 hoses.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

  2. INSTALL OIL FILTER BRACKET

    Click here

  3. CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY


    1. A01WYUDE04
      Text in Illustration
      *a Upward
      *b Rearward

      Connect the 2 hoses and water by-pass pipe.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

    2. Install the 3 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL OIL FILTER ELEMENT

    Click here

  5. ADD ENGINE OIL

    Click here

  6. INSPECT ENGINE OIL LEVEL

    Click here

  7. ADD ENGINE COOLANT

    Click here

  8. INSPECT FOR OIL LEAK

    Click here

  9. INSPECT FOR COOLANT LEAK

    Click here

  10. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  11. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  12. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here