ENGINE OIL COOLER REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE OIL

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  7. REMOVE FAN AND GENERATOR V BELT

    Click here

  8. REMOVE OIL FILTER ELEMENT

    Click here

  9. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

    Click here

  10. DISCONNECT COOLER COMPRESSOR ASSEMBLY

    Click here

  11. REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. B001XY7

      Remove the 3 bolts.

    2. Disconnect the 4 hoses and remove the water by-pass pipe.

  12. REMOVE NO. 1 OIL COOLER BRACKET


    1. B001VNL

      Remove the 2 nuts and bracket.

    2. Disconnect the ground wire from the cylinder block.

  13. REMOVE OIL FILTER BRACKET


    1. B001XGV

      Remove the 2 bolts, 2 nuts and filter bracket.

    2. B001X4V

      Remove the 2 O-rings.

  14. REMOVE OIL COOLER ASSEMBLY


    1. B001X8F

      Remove the 5 nuts and oil cooler from the oil filter bracket.

    2. B001YOE

      Remove the 2 O-rings.

  15. REMOVE OIL COOLER SPACER


    1. B001ZUL

      Remove the bolt and oil cooler spacer from the oil filter bracket.

    2. B001X2UE06
      Text in Illustration
      *1 Gasket

      Remove the gasket.