THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


    1. Install a new gasket and the water inlet with thermostat with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
    2. B001W6DE01
      Text in Illustration
      *a RH Side
      *b Front

      Connect the No. 5 water by-pass hose.

      Tech Tips

      Install the hose so that the direction of the hose clamp is as indicated in the illustration.

  2. INSTALL FAN SHROUD

    Click here

  3. INSTALL NO. 2 RADIATOR HOSE

  4. INSTALL NO. 1 RADIATOR HOSE

  5. INSTALL AIR CLEANER ASSEMBLY

    Click here

  6. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  7. ADD ENGINE COOLANT

    Click here

  8. INSPECT FOR COOLANT LEAK

    Click here

  9. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  10. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  11. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  12. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here