THERMOSTAT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

If the thermostat is not installed, cooling efficiency decreases. Even if the engine tends to overheat, do not remove the thermostat.

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER ASSEMBLY

    Click here

  8. REMOVE NO. 1 RADIATOR HOSE

  9. REMOVE NO. 2 RADIATOR HOSE

  10. REMOVE FAN SHROUD

    Click here

  11. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


    1. B001XZVE02
      Text in Illustration
      *1 No. 5 Water By-pass Hose

      Disconnect the No. 5 water by-pass hose.

    2. B001XO3

      Remove the 3 nuts, water inlet with thermostat and gasket.