INTAKE MANIFOLD INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTAKE MANIFOLD FOR FLATNESS


    1. A01X4JYE01
      *1 No. 3 Intake Manifold Side:
      *2 Cylinder Head Side:

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 1 and No. 3 intake manifold, and the No. 1 intake manifold and cylinder head.

      Maximum Warpage
      Item Specified Condition
      No. 3 intake manifold 0.10 mm (0.00394 in.)
      Cylinder head 0.10 mm (0.00394 in.)

      If the warpage is more than the maximum, replace the No. 1 intake manifold.

  2. INSPECT NO. 2 INTAKE MANIFOLD FOR FLATNESS


    1. A01X4JYE01
      *1 No. 3 Intake Manifold Side:
      *2 Cylinder Head Side:

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 2 and No. 3 intake manifold, and the No. 2 intake manifold and cylinder head.

      Maximum Warpage
      Item Specified Condition
      No. 3 intake manifold 0.10 mm (0.00394 in.)
      Cylinder head 0.10 mm (0.00394 in.)

      If the warpage is more than the maximum, replace the No. 2 intake manifold.

  3. INSPECT NO. 3 INTAKE MANIFOLD FOR FLATNESS


    1. A01X258E01
      *1 Intake Pipe Side:
      *2 Intake Manifold Side:

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface between the No. 3 and No. 1 intake manifold, the No. 3 and No. 2 intake manifold, and the No. 3 intake manifold and intake pipe.

      Maximum Warpage
      Item Specified Condition
      Intake pipe 0.10 mm (0.00394 in.)
      No. 2 and No. 3 intake manifold 0.15 mm (0.00591 in.)

      If the warpage is more than the maximum, replace the No. 3 intake manifold.