THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

   
   

   1. Install a new gasket and the water inlet with thermostat with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT NO. 2 RADIATOR HOSE

3. INSTALL FAN SHROUD

   Click here

4. INSTALL NO. 1 RADIATOR HOSE

5. INSTALL AIR CLEANER CAP AND HOSE

   Click here

6. ADD ENGINE COOLANT

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here

8. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

9. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

10. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

11. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here