EXHAUST PIPE INSTALLATION

PROCEDURE


  1. INSTALL FRONT EXHAUST PIPE ASSEMBLY


    1. Install a new gasket and the front exhaust pipe to the exhaust manifold with the 2 nuts.

      Torque:
      54 N*m  { 554 kgf*cm, 40 ft.*lbf }

  2. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY


    1. Install a new gasket and the front No. 2 exhaust pipe to the exhaust manifold LH with the 2 nuts.

      Torque:
      54 N*m  { 554 kgf*cm, 40 ft.*lbf }

  3. INSTALL CENTER EXHAUST PIPE ASSEMBLY


    1. Install 2 new gaskets to the center exhaust pipe.

    2. Connect the center exhaust pipe to the 3 exhaust pipe supports.

    3. Install the center exhaust pipe with the 4 bolts.

      Torque:
      48 N*m  { 489 kgf*cm, 35 ft.*lbf }

  4. INSTALL EXHAUST PIPE DAMPER


    1. Install the exhaust pipe damper and No. 4 exhaust pipe upper protector with the 2 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  5. INSTALL TAILPIPE ASSEMBLY


    1. Install a new gasket to the center exhaust pipe.

    2. Install the tailpipe to the 2 exhaust pipe supports.

    3. A01WZ02E02
      Text in Illustration
      *a Top
      *b LH Side

      Install a new clamp.

      Torque:
      32 N*m  { 326 kgf*cm, 24 ft.*lbf }

      Tech Tips

      Install the clamp within the angle range shown in the illustration.

  6. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

    Click here

  7. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

    Click here

  8. INSTALL PROPELLER SHAFT HEAT INSULATOR

    Click here

  9. INSPECT FOR EXHAUST GAS LEAK

    Click here