EXHAUST PIPE REMOVAL

PROCEDURE


  1. REMOVE PROPELLER SHAFT HEAT INSULATOR

    Click here

  2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

    Click here

  3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

    Click here

  4. REMOVE TAILPIPE ASSEMBLY


    1. A01X65V

      Remove the bolt and exhaust tailpipe clamp.

    2. Remove the 2 exhaust pipe supports, gasket and tailpipe.

  5. REMOVE EXHAUST PIPE DAMPER


    1. A01X914

      Remove the 2 bolts, exhaust pipe damper and No. 4 exhaust pipe upper protector from the tailpipe.

  6. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. Remove the 4 bolts and disconnect the center exhaust pipe.

    2. Remove the 3 exhaust pipe supports, 2 gaskets and center exhaust pipe.

  7. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY


    1. A01X8O9

      Remove the 2 nuts and front No. 2 exhaust pipe.

    2. Remove the gasket.

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01X3I3

      Remove the 2 nuts and front exhaust pipe.

    2. Remove the gasket.