EXHAUST PIPE REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves when removing the exhaust pipe.

  • The exhaust pipe is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe has cooled down before removing it.

PROCEDURE


  1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

    Click here

  2. REMOVE TAILPIPE ASSEMBLY


    1. Remove the bolt, clamp and gasket.

    2. Remove the tailpipe from the 2 exhaust pipe supports.

  3. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. Remove the 4 bolts and 2 compression springs.

    2. Remove the center exhaust pipe from the 3 exhaust pipe supports.

    3. Remove the 2 gaskets from the front exhaust pipe and front No. 2 exhaust pipe.

  4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY


    1. Disconnect the heated oxygen sensor connector.

    2. Remove the 2 nuts and front exhaust pipe.

    3. Remove the gasket from the front exhaust pipe.

  5. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

    Click here

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Disconnect the heated oxygen sensor connector.

    2. Remove the 2 nuts and front exhaust pipe.

    3. Remove the gasket from the front exhaust pipe.