DIFFERENTIAL PRESSURE SENSOR(for DPF) REMOVAL

PROCEDURE


  1. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


    1. for Bank 1:


      1. A01X43V

        Disconnect the differential pressure sensor connector.

      2. Disconnect the No. 1 air hose and No. 2 air hose.

      3. Remove the bolt and sensor bracket.

      4. Remove the bolt and differential pressure sensor from the sensor bracket.

    2. for Bank 2:


      1. Remove the front propeller shaft ( Click here).

      2. A01XA06

        Detach the 4 wire harness clamps.

      3. Disconnect the differential pressure sensor connector and detach the wire harness clamp.

      4. A01X72X

        Disconnect the No. 3 air hose and No. 4 air hose.

      5. Remove the bolt and sensor bracket.

      6. Remove the bolt and differential pressure sensor from the sensor bracket.