EXHAUST GAS TEMPERATURE SENSOR(for DPF) INSTALLATION

PROCEDURE


  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The identification tape on the exhaust gas temperature sensor is gray.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The identification tape on the exhaust gas temperature sensor is white.

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the 2 exhaust gas temperature sensors.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The identification tape on the exhaust gas temperature sensor is pink.

  4. INSTALL MONOLITHIC CONVERTER ASSEMBLY

    Click here

  5. INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the 2 No. 4 exhaust gas temperature sensors.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The identification tape on the exhaust gas temperature sensor is gold.

  6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

    Click here