EXHAUST GAS TEMPERATURE SENSOR(for DPF) REMOVAL

PROCEDURE


  1. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

    A01X21VE01
    Text in Illustration
    *A for Bank 1
    *B for Bank 2

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the 2 No. 4 exhaust gas temperature sensors.

  3. REMOVE MONOLITHIC CONVERTER ASSEMBLY

    Click here

  4. REMOVE EXHAUST GAS TEMPERATURE SENSOR

    A01X09IE01
    Text in Illustration
    *A for Bank 1
    *B for Bank 2

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the 2 exhaust gas temperature sensors.

  5. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)

    A01XA28

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.

  6. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)

    A01X39D

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.