Click here

AIR PUMP REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  2. Click here

    REMOVE FRONT FENDER APRON TRIM PACKING A

    Click here

  3. Click here

    DISCONNECT FRONT FENDER LINER RH


    1. A01XC2N

      Remove the screw, and disconnect the liner from the front bumper cover.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Remove the 4 clips.

    4. Partially remove the fender liner.

      Tip:

      It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.

  4. Click here

    REMOVE NO. 3 AIR INJECTION SYSTEM HOSE


    1. A01X2N3

      Inside engine room:


      1. Slide the clip and disconnect the No. 3 air injection system hose from the air tube.

      2. Detach the clamp and disconnect the No. 3 air injection system hose from the clamp.

    2. A01X1JL

      Inside front fender RH:


      1. Detach the clamp from the air pump bracket.

      2. Slide the clip and remove the No. 3 air injection system hose.

  5. Click here

    REMOVE AIR PUMP ASSEMBLY


    1. A01X0R1

      Disconnect the connector.

    2. Detach the connector clamp from the bracket.

    3. Disconnect the wire harness from the clamp.

    4. A01X5IQ

      Remove the 2 bolts, 2 nuts and air pump assembly.

  6. Click here

    REMOVE AIR PUMP INLET


    1. A01X655

      Remove the 2 bolts and air pump inlet.

  7. Click here

    REMOVE NO. 1 AIR INJECTION SYSTEM HOSE


    1. A01X3RJ

      Remove the No. 1 air injection system hose from the air pump assembly.

  8. Click here

    REMOVE AIR PUMP


    1. A01X1I3

      Detach the 2 clamps from the air pump bracket.

    2. Remove the 3 insulators from the air pump.