AIR INJECTION DRIVER(w/ Secondary Air Injection System) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY


    1. B001YPK

      Remove the bolt and disconnect the ground wire.

    2. Disconnect the wire harness clamp.

    3. B001WWW

      Disconnect the 4 air injection control driver connectors.

    4. B001WKD

      Remove the 3 bolts and air injection control driver assembly.