AIR PUMP REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  2. REMOVE FRONT FENDER APRON TRIM PACKING A

    Click here

  3. DISCONNECT FRONT FENDER LINER RH


    1. A01XC2N

      Remove the screw, and disconnect the liner from the front bumper cover.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Remove the 4 clips.

    4. Partially remove the fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.

  4. REMOVE NO. 3 AIR INJECTION SYSTEM HOSE


    1. A01WZP3

      Inside engine room:


      1. Slide the clip and disconnect the No. 3 air injection system hose from the air tube.

      2. Detach the clamp and disconnect the No. 3 air injection system hose from the clamp.

    2. A01X0WL

      Inside front fender RH:


      1. Detach the clamp from the air pump bracket.

      2. Slide the clip and remove the No. 3 air injection system hose.

  5. REMOVE AIR PUMP ASSEMBLY


    1. A01X1GQ

      Disconnect the connector.

    2. Detach the connector clamp from the bracket.

    3. Disconnect the wire harness from the clamp.

    4. A01X8T4

      Remove the 2 bolts, 2 nuts and air pump assembly.

  6. REMOVE AIR PUMP INLET


    1. A01X655

      Remove the 2 bolts and air pump inlet.

  7. REMOVE NO. 1 AIR INJECTION SYSTEM HOSE


    1. A01X3RJ

      Remove the No. 1 air injection system hose from the air pump assembly.

  8. REMOVE AIR PUMP


    1. A01X1I3

      Detach the 2 clamps from the air pump bracket.

    2. Remove the 3 insulators from the air pump.