FUEL PUMP REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

A01X08RE01
Text in Illustration
*A for Single Tank Type *B foe Double Tank Type

PROCEDURE


  1. INSTALL FUEL PUMP (for Double Tank Type)


    1. A01X18P

      Connect the fuel pump wire harness connector to the fuel pump.

    2. A01X31RE02
      Text in Illustration
      *1 O-Ring
      *2 Spacer

      Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.

    3. A01X1K5

      Attach the 2 claws to the claw holes to install the fuel pump.

  2. INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)


    1. A01X8UA

      Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.

  3. INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)


    1. A01X6M9

      Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.

    2. A01X2V8E02
      Text in Illustration
      *1 Jet Pump

      Attach the jet pump to the No. 1 fuel sub-tank.

      Tech Tips

      Make sure the 2 protrusions of the jet pump are properly installed into the No. 1 fuel sub-tank.

    3. Connect the fuel pump connector.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here