FUEL PUMP REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

A01X10SE01
*1 for Single Tank Type:
*2 for Double Tank Type:

PROCEDURE


  1. INSTALL FUEL PUMP (for Double Tank Type)


    1. A01X18P

      Connect the fuel pump wire harness connector to the fuel pump.

    2. A01X31RE01
      *1 O-Ring
      *2 Spacer

      Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.

    3. A01X1K5

      Attach the 2 claws to the claw holes to install the fuel pump.

  2. INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)


    1. A01X8UA

      Attach the 3 claws to the claw holes to install the fuel sub-tank.

  3. INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)


    1. A01X6M9

      Attach the 3 claws to the claw holes to install the fuel sub-tank.

    2. A01X2V8E01
      *1 Jet Pump

      Attach the jet pump to the sub-tank.

      Tech Tips

      Make sure the 2 protrusions of the jet pump are properly installed into the sub-tank.

    3. A01X0ZV

      Connect the fuel pump connector.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here