INJECTOR DRIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.


    1. Disconnect the cables from the negative (-) main battery and sub-battery terminals.

  3. REMOVE INJECTOR DRIVER


    1. w/ DPF:


      1. B001XNK

        Disconnect the 7 injector driver connectors and detach the 2 wire harness clamps.

      2. B00201U

        Remove the bolt and disconnect the ground wire from the No. 2 injector driver bracket.

      3. B001YXV

        Remove the 3 bolts and injector driver assembly.

    2. w/o DPF:


      1. B001W3E

        Disconnect the 4 injector driver connectors.

      2. B001XLO

        Detach the fuel hose clamp and wire harness clamp and remove the bolt and disconnect the ground wire from the No. 1 injector driver bracket.

      3. Remove the 3 bolts and injector driver assembly.

    3. B00205LE02
      Text in Illustration
      *A w/ DPF
      *B w/o DPF

      Remove the 2 bolts, No. 2 injector driver and No. 2 injector driver bracket from the No. 1 injector driver bracket.

    4. B001Z0P

      w/ DPF:

      Remove the 4 screws, No. 1 injector driver bracket and No. 1 injector driver.

    5. B001ZXV

      w/o DPF:

      Remove the 4 screws, No. 1 injector driver bracket, No. 1 injector driver and injector driver bracket.

    6. B001Y72

      w/ DPF:

      Remove the 4 screws, No. 2 injector driver bracket and No. 2 injector driver.

    7. B001X1C

      w/o DPF:

      Remove the 4 screws, No. 2 injector driver bracket, No. 2 injector driver and injector driver bracket.