FUEL SENDER GAUGE ASSEMBLY(for Fuel Sub Tank) INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    A01X7FIE02
    Text in Illustration
    *a

    Component without harness connected

    (Fuel Sender Gauge)
    *b F (Upper)
    *c E (Lower)

    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 3 Float level is F (upper) 12 to 18 Ω
      Float level is E (lower) 405 to 415 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.